Printer Bambu Lab PETG HF Purple 3D Printing Filament 1KG - Green

High-Speed Print Performance & Material Properties

Filament Type: PETG HF (High-Flow Polyethylene Terephthalate Glycol formulation)
High-Speed Optimization: Engineered for rapid extrusion speeds up to 300 mm/s without layer delamination or flow starvation
Standard Filament Diameter: 1.75 mm (Strict dimensional tolerance: ±0.03 mm)
Surface Finish: Smooth matte surface aesthetic (reduced gloss compared to traditional PETG)
Spool Net Weight: 1.0 kg (2.2 lbs) full spool
Mechanical Properties: Superior impact strength, high toughness, chemical resistance, and enhanced inter-layer bonding

Recommended Printing & Thermal Parameters

Printing Nozzle Temperature: 230 °C – 260 °C
Heatbed Temperature: 65 °C – 75 °C
Max Printing Speed: Up to 300 mm/s (Volumetric speed capability: up to 21 mm³/s)
Recommended Build Plates: Bambu Textured PEI Plate, Bambu Cool Plate, or Bambu Engineering Plate
Cooling Fan Speed: 40% – 80% (Adjustable based on overhang and speed requirements)

Drying, AMS Compatibility & Storage Requirements

AMS Compatibility: Fully compatible with the Bambu Lab AMS & AMS Lite systems (includes RFID auto-sensing chip)
Moisture Sensitivity: Highly hygroscopic material requiring thorough drying prior to printing
Pre-Print Drying Recommendation: Dry at 65 °C for 8 hours in a filament dryer or oven before use
Packaging Standard: Vacuum-sealed with integrated desiccant bag inside a reusable spool housing